Electrical Rubber Mat

Electrical Rubber Mat (Convential Type)

Vardhman® IS:5424 are used as floor covering around electrical panels as a safeguard to the life of the workmen due to possible leakage of current and short-circuit.

The mats are manufactured by vulcanized rubber compound free from fabric insertion & fibrous material.

The upper surface have a ribbed, fluted, chequered, plain or other suitable pattern as per requirement. The lower surface have cloth marked finish or plain.

Talk to Our Experts

Download Brochure

Applications:

High Voltage Panels

Substations

HT/LT Switch Gears

Transformer Rooms

S. No.	Technical Specification	Value (All Thicknesses)
1.	Composition	Vulcanized rubber compound free from any insertion
2.	Upper Surface	Checkered/Fluted
3.	Lower Surface	Plain
4.	Thickness	6.5mm/8mm/10mm/12mm 15mm/20mm/25mm
5.	Length x Width	1m x 2m 1.2m x 2.4m 0.9m x 1.8m
6.	Tensile Strength	Min 50kgf/cm2
7.	Elongation	Min. 250%
*We can supply the Electrical Rubber Mat in any length and width as per customer requirement.

*Specification are subject to change without prior notice.

Note:

Mats shall be ISI Marked at every meter with unique CM/L No.
Mats shall be Type Tested by ERDA.
Mats shall be pastable type. Pasting / Fixing or request.
Inspection facilities are available.
In-house test certificate along with supply
Mats shall be replaced on first sign of any damage.

Electrical Rubber Mat