rubber sheet, industrial hose, rubber hoses manufacturer, exporter & supplier india
 
 
 
     
Our Products
   
Rubber Hoses
 
Industrial Hoses
 
Sand/Shot Blasting Hose
Air Ducting Hose
Hot Water Hose
Carbon Free Hose
Fly Ash Hose
Steam Hose
Chemical Hose
Water Suction & Discharge Hose Heavy Duty
Water Suction & Discharge Hose Light Duty
General Purpose Rubber Water Hose
Cement Grouting Hose
Rubber Hose for Welding
Rubber Air Hose
Oil & Solvent Hose
Rubber Hose for Fuel Dispensing
Asbestos Covered Furnace Coolant Hose
On Shore Oil Suction
Road and Rail Tanker Hose
Agriculture Spray Hose
Brewery & Food Hose
Radiator Hose
Vacuum Hose
Rubber Hydraulic Hose
Low Pressure Hose
Hi-Pressure Hoses
 
Single Wire Hose
Double Wire Hose
SAE 100 R3 Hose
SAE 100 R5 Hose
SAE 100 R6 Hose
Air / Rock Drill Hose
Steam Hose
Rubber Sheets
Other Products
 
 
 
 
 
 
 
 
General Purpose Rubber Water Hose
Conforming to IS:444/1987 TYPE 1,2,3A & 3B CM/L-8570081
Application: For water delivery purpose in Railways, Industries, Dams, Mines, Horticulture, Irrigation, Fire fighting, Construction Sites, Car Washing, De-watering etc.
Construction:
  Lining : A rubber inner lining smooth in bore and free from air blisters, porosity & splits made by natural/synthetic/ blend rubber compound.
  Reinforcement : Plies of rubber impregnated woven textiles or braided high strength natural/synthetic yarns.
  Cover : Smooth/fluted/cloth marked finish, free from air blisters, porosity and any other visible defects, and resistant to abrasion, ozone, oxidation, heat & weather.
Pressures:Type 1 - W.P. 0.60 MPa & Min. B.P. 1.90 MPa.
                      Type 2 - W.P. 1.00 MPa & Min. B.P. 3.15 MPa.
                      Type3A & B - W.P. 2.50 MPa & Min. B.P. 8.00 MPa.
10.00 ± 0.75 1.50 1.0 1.50
12.50 ± 0.75 1.50 1.0 1.50
16.00 ± 0.75 1.50 1.0 1.50
20.00 ± 0.75 1.50 1.0 1.50
25.00 ± 1.25 2.00 1.0 --
31.50 ± 1.25 2.00 1.0 --
38.00 ± 1.50 2.00 1.0 --
45.00 ± 1.50 2.50 1.0 --
50.00 ± 1.50 2.50 1.0 --
56.00 ± 1.50 2.50 1.0 --
63.00 ± 1.50 2.50 1.0 --
75.00 ± 2.00 2.50 1.0 --
100.00 ± 2.00 2.50 1.0 --
W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2
Length : Mandrel made hose upto 20 mtr., Moulded braided hose in continuos long length.
 
     
Home  |  About us  |  Facilities  |  Products  |  R&D  |  Gallery  |  Certifications  |  Contact us
High Pressure Rubber Hoses Exporter  |  High Voltage Insulating Mats Manufacturer  |  Natural, SBR, EPDM, Neoprene, Nitrile, Abrasion Reistant, Diaphragm, Vilton Rubber Sheets Manufacturer and Exporter in India